In EASERA almost any evaluation and measure can be derived directly or indirectly from loaded or measured impulse response data. The same is true for most of the intelligibility measures.

EASERA allows for calculating STI, STI (Male), STI (Female) as well as AlCons and the equivalent STIPa. Note that these values are all calculated from the modulation transfer function (MTF), which in turn originates in the impulse response.

Yes, it can.

EASERA implements a new method of measuring nonlinearities in the response of a system. By utilizing a pink sweep as an excitation signal, all of the distortion components are located at the end of the impulse response and can be separated by windowing.

After some post-processing the individual harmonic frequency responses can be viewed and even THD in a high frequency resolution can be computed. Of course also the K2, K3 K.. spectra are available.

There are basically three native file formats available in EASERA: EMD, ETM and EFR.

EMD is a time domain format that also saves the raw measurement data. Generally this is recommendable to use during measurement sessions as it allows for later inspection of the actually recorded raw input data.

The ETM contains the IR data only, but it is otherwise identical with the EMD. It is useful if you are not interested in keeping the raw data or if you just want to save some overlay files.

For 1/3^rd Octave Band Resolution

To calculate reverberation times (RT) for frequencies lower than 100 Hz in 1/3^rd octaves, you need to apply a filter to the broadband Transfer Function. There are two ways to apply this filter.

Option 1: Applying the Filter Manually

If you have installed the Digidesign ASIO driver, this can cause the problem.
Extract the file from the attached zip below and place it in the folder where​​ "SysTune.stcfg" is located. For your computer that is C:\Users\<user>\AppData\Local\AFMG\EASERA SysTune  (<user> is your log-in name).

This will disable the Digidesign ASIO driver in SysTune only.